DFE

 
 

Intermediate Bulk Containers

For transport of Bulk hazardous and non-hazardous liquids. DFE offer the Stainless Steel IBC as a convenient safe method of transporting liquids too point of use.

The IBC eliminates the requirements of shipping, transport and disposal of 200 ltr (55 US Gal) drums, and is directed at industries with high consumption of liquid products.

The IBC is filled at the point of product manufacture or bulk storage and transported to the end use site, so no additional decanting is required.

A 50mm (2") Camlock fitting outlet allows the product to be decanted to the end use without requiring drum pumpsor handling equipment.

Description: 1500 Ltr Stainless Steel IBC
Nominal Capacity: 1500 Ltr (400 US Gals)
Actual Capacity: 1575 Ltr (416 US Gals)
Empty Mass: 265 Kgs (584 lbs)
Max Permissable Gross Mass: 2360 Kgs (5799 lbs)
Max Product Weight: 1.5 SG (12.5 ppg)
Type of Substance: Liquids, Solids
UN Packaging Group: II & III
UN Code: 31A Packaging Group: A
Stacking Height: Maximum of one IBC to be stacked upon bottom IBC
Construction: Welded
Materials of Manufacture: Body: ASTM A240 -Grade 304L
Fitting: ASTM A240 -Grade 304L
Seals and couplings to customer requirements

For transport of Bulk hazardous and non-hazardous liquids. DFE offer the Stainless Steel IBC as a convenient safe method of transporting liquids to point of use.

The IBC eliminates the requirements of shipping, transport and disposal of 200 ltr (55 US Gal) drums, and is directed at industries with high consumption of liquid products.

The IBC is filled at the point of product manufacture or bulk storage and transported to the end use site, no additional decanting is required.

A 50mm (2") Camlock fitting outlet allows the product to be decanted to the end use without requiring drum pumpsor drum handling equipment.

The IBC is designed and approved for 1500 litres (400 US Gals) of fluid up to 1.5 SG (12.5 pounds per gal), and can be stacked two high while filled.

It meets UN Tank code 31A, and UN Packaging Groups Class II and III (further UN codes are pending).

The IBC is ideally suited to the transport and use of fluids when minimal contact by personnel is required, or when floor area is restricted.

As an example, the IBC's are currently being used to supply bulk drilling mud additives in Bass Strait, Australia. They are transported as open deck cargo to the drilling platform, and stacked two high near the end use point. The product is pumped from the IBC's directly into the drilling mud storage area, no direct product contact by personnel is necessary. Empty IBC's are back loaded for reuse.

For more information or to contact our technical department, phone +64 6 7552206 or email us now.


Inquire about this product
Name*
Email*
Company:
Position:
Phone No:
Address:
Product
Questions:
This is a captcha-picture. It is used to prevent mass-access by robots. (see: www.captcha.net)
Type in security code from graphic.
Back to view Products